|
Post by oblertone on Jan 6, 2019 11:06:35 GMT
My daughter, her partner and my grandson are (hopefully) about to move into their first house and having experienced my WFO on many occasions they've asked for one as a moving in present. The problems arise in that I live in Devon, and they'll be in Essex which means building time will be either sporadic or fairly short lived; this has caused me to ponder how to build something that I could complete in a relatively short period of time. My own build is mobile and took 18 months to finally complete, they would like a permanent structure in a shorter time frame and it's this that has led me towards thinking of a 'dry' build. The basic plan goes something like this: - Dig out and lay suitable plinth (one day)
- Single block walls to cooking floor height
- Cooking floor and cavity entry supported by pre-cast lintels
- Paving slab base, vermiculite board
- Precast modular oven, double skin flue
- Exterior walls raised to above dome height
- Wood framing to support waterproof membrane and slate roof
- Entire cavity filled with loose vermiculite
- Lead top-hat flashing for flue
- Membrane and slate roof covering
- Exterior rendered, tiled and/or painted (TBC)
Apart from the first and last tasks I think that with assistance I could complete the main build in a week and using a pre-cast modular oven and dry vermiculite it could be ready to go in short order with minimal drying-out. What say the collective ?
|
|
|
Post by devontiger on Jan 6, 2019 12:22:24 GMT
A week!!! Day 1 At the end of the week I was doing Pizza.
|
|
|
Post by devontiger on Jan 6, 2019 12:32:18 GMT
Final project to finish the job. Yeh, ok it took me a few weeks extra, but I did have other projects on the go. So you should be able to do it in a week.....
|
|
|
Post by simonh on Jan 6, 2019 14:56:16 GMT
I’ve been thinking about adding a second oven closer to the house and for ease I was thinking about making the base out of sleepers. Something like that could easily be put together in a day I reckon.
|
|
|
Post by downunderdave on Jan 6, 2019 21:00:49 GMT
Timber framing for a dog kennel style is not recommended, steel is preferred. Whilst most of the framing is well away from substantial heat the front frame close to the entry is vulnerable, so at least use steel framing there and perhaps anything close to the flue.
|
|