Post by dylanbhafc on Jun 4, 2015 10:10:39 GMT
Hello all! After lots of lurking on this and other boards and lots of planning I am finally underway with my build. I am building a WFO along with an outdoor kitchen. All of which is being crammed into a pretty small space. My budget is limited and I am attempting to use recycled / freecycled materials as much as possible. So far I have managed to source for free or little cost:
Night storage heater bricks - big flat square purple ones
Concrete blocks
Bricks - old red clay ones but frogged - 2 different sets, about 250 in total
Wood to assist in construction, lots of old decking etc
Portland cement
Sharp sand
Block paving bricks, about 50 - not sure what I'll use these for but they were free!!
I want my oven to be used for pizza and roasting meat so I have gone for the biggest area I can fit in. The outdoor kitchen will incorporate a gas bbq, tandoor oven, small sink and cocktail bar.
I used a really cool free app called sweethome 3D to design, measure and plan to whole project:
Here is my planning to get the largest oven floor size from the space and materials I had:
Here are some more build pics:
Here is my Tandoor oven that I built using flower pots:
Night storage heater bricks - big flat square purple ones
Concrete blocks
Bricks - old red clay ones but frogged - 2 different sets, about 250 in total
Wood to assist in construction, lots of old decking etc
Portland cement
Sharp sand
Block paving bricks, about 50 - not sure what I'll use these for but they were free!!
I want my oven to be used for pizza and roasting meat so I have gone for the biggest area I can fit in. The outdoor kitchen will incorporate a gas bbq, tandoor oven, small sink and cocktail bar.
I used a really cool free app called sweethome 3D to design, measure and plan to whole project:
Here is my planning to get the largest oven floor size from the space and materials I had:
Here are some more build pics:
Here is my Tandoor oven that I built using flower pots: